Shuttle 3.0-8T - $799.00

(click for larger image)

FEATURES

• Ultra Light 2.75 lb Design • Power: 175W/8 ohms; 300W/4 ohms • High Current, Class D Power Amplifier • E xtended Range Input Gain for Active/ Passive Sensitivity • Active EQ w/Parametric Mids • 3-Band Signal Shape Circuit • Tuner Out • Headphone Jack • Aux. Input • Limiter Circuit • LED Status Indicators • Speakon® and 1⁄4” Speaker Outputs • Full XLR Direct Out Interface • Combo w/8” NEO and tweeter • 175W as combo/300W with EXT. Cab • Compact 13.5 lb combo • Removable Amp Chassis • Rear-ported for Full Bass Response Removeable Chassis design Power Output Cabinet Response Speaker Configuration Preamp Type Weight Lbs. Dimensions HxWxD 175 W/300W 58 - 20k HZ 1 x 8" & Tweeter FET 13.5 13 1/2" x 11 7/8" x 10 3/4"

Shuttle 6.0-12T - $,1300.00

Shuttle 6.0 w/o enclosure - $700.00

(click for larger image)

Our new SHUTTLE series also incorporates this high- innovative removable chassis design powered 600 watt design, while remaining extremely compact and weighting only 3.75 lbs. The SHUTTLE 6.0 blends the best of analog and digital platforms to produce the ultimate in warmth, punch and power.

The signal path utilizes a 12AX7 tube preamp with our acclaimed Active EQ and responsive Signal Shape circuitry. An optional foot switch is available for use with the Signal Mute and our 3 Signal Shaping circuits.

The power amp section is a leading-edge high power CLASS D module, which also incorporates a Switch Mode Power Supply. The SHUTTLE 6.0 delivers 375 watts at 8 ohms and over 600 watts at 4 ohms.

As a part of the unique Shuttle design the amplifier can be removed from the “saddle” of the combo models to provide ultimate flexibility in this bass system.

The Shuttle 6.0 chassis is matched to a compact, lightweight 1 x 12” and tweeter enclosure loaded with our GNX12300Neodymium loudspeaker. The rear ported cabinet delivers the rich, tight response of the Shuttle amplifier and weights in at travel friendly 32 lbs. A bottom mounted tilt-back kickstand is provided. An 8 ohm combo which delivers 375 watts into the internal speaker and over 600 watts with an extension cabinet.

FEATURES

	Removeable Chassis design
Power Output Cabinet Response Speaker Configuration Preamp Type Weight Lbs. Dimensions HxWxD 375 W/600W 45 - 18k HZ 1 x12" & Tweeter TUBE 32 21 3/4" x 18 3/8" x 14 1/4"

GBE 1200 - $1,380.00 (click for larger image)

Based upon the tone and versatility of our popular GBE 600, the new GBE 1200 “takes it to the limit” in features, power and performance.

With added refinements and output power, the GBE 1200 delivers 1200 watts of power, tone and versatility into real world “reactive” speaker loads. The ability for our amplifier designs to drive “resistive” and “reactive” speaker loads, along with our Extended Burst Power ratings, separates Genz Benz from the pack. Our amplifiers are louder, punchier, warmer and more articulate.

The GBE 1200 introduces our unique “POWERFLEX” circuitry and switching which helps to provide full and stable power delivery into selectable 4 or 2 ohm speaker loads.

The Preamp section of the three-space GBE 1200 is enhanced with two separate FET and 12AX7 TUBE channels that can be selected independently or mixed together creating endless tonal possibilities. A “global” Signal Shaping Circuit and Master output section round out the performance aspects of this amp.

The GBE 1200 is beautiful too! The contoured, sleek lines of the 5mm thick, machined aluminum front panel are adorned with blue LED’s and color-coded Master Status LED’s which provide comprehensive operator information at a glance. Ergonomically sculpted handles add comfort and convenience.

The GBE 1200’s unmatched fit and finish, versatility, power and tone make it the benchmark in bass amplification.

DYNAMIC OUTPUT INTO “REACTIVE” REAL WORLD SPEAKER LOADS
An important and not commonly discussed specification is a power amps ability to deliver rated power into a “reactive load”. All speakers present a reactive load to the amplifier, reducing real world driving ability. Although speaker cabinets are usually rated as 8 or 4 ohms, this is a “nominal” impedance rating and in actuality can dip as much as 30%.

Since speakers are not resistive loads but rather are highly “reactive”, amplifiers must work even harder to drive them and will often prematurely trigger their protective limiting circuits - not so with GENZ BENZ bass amps!!

Our bass amplifier designs compensate for this effect and are rated to deliver their full power into reactive loads. This is one important reason GENZ BENZ amplifiers sound so big!!

POWERFLEX
Maximum Power Feature
This feature, designed into the GBE 1200, optimizes the massive power supply to better deliver maximum power levels at 4 ohms and for extended 2 ohm operation into reactive loads.

A large switch on the rear panel is provided so that the amplifier can be switched to correctly match the total cabinet impedance load on the amplifier for optimum performance and power.

An amber LED indicator is provided on the front panel Master Status section to indicate when the POWERFLEX feature is switched to
2 ohm operation.


EXTENDED BURST POWER RATINGS
The GBE 1200 is rated using the Extended Burst Power method which tests amplifier power output using a duty cycle 10 times more stringent than the IHF standard. This demanding test method provides a much more accurate representation of the performance demands on the bass instrument amplifier in the real world

FEATURES

• Active/Passive Input Stage • Signal Mute Switch • Tuner Out (also a rear panel Tuner Out) • Independent FET and 12AX7 TUBE Channels • Active 5 band EQ Section on each Channel with Two Shelving and Three PeakingNetworks • Channel Select and Channel Mix Switches (Footswitchable) • Channel O/L LED’s • Signal Shape Circuitry w/L.F. Extend, Mid Scoop, H.F. Attack all Adjustable (Min. – Max.) and Footswitchable • Unique “Soft Limit” Circuit • Comprehensive Amplifier Status LED’s • Master Volume • Heavy-duty Toggle On/Off Switch • Sleek, Ergonomic Amp Handles • Sturdy 3 Space Metal Chassis with 5mm Thick Aluminum Faceplate • Solid Aluminum Knurled Knobs on Premium Detent Pots • Variable Speed Fan Cooling (thermally controlled) • Heavy-duty 5 Button Footswitch (included) • Weight: 42 lbs • Dimensions: 19”W x 15”D x 5.25”H REAR PANEL FEATURES: • Tuner Out (Parallel with Front Panel Tuner Out) • Comprehensive Direct Output Section w/ Pre/Post Switch, Attenuation Sw, Ground Lift Sw • Three Effects Loops — Independent Channel and Global Loops • Slave Out Jack • Dual Speakon® Output Connectors • POWERFLEX Impedance Selector Switch • Dual Voltage Switch • Heavy-duty Toroidal Transformer Power Output Cabinet Response Speaker Configuration Preamp Type Weight Lbs. Dimensions HxWxD 550 W/1000 W/1200 W 8 ohm / 4 ohm / 2 ohm N/A N/A FET/TUBE 42 5 1/2" x 19" x 15"

GBE 750 Bass Amplifier

Price: $1,349.00

In the GBE 750, we've combined the tonal flexibility and aesthetics of the GBE 1200 in the convenience of a 750-watt, two-rack space design. The preamp section is dual channel: one FET and one 12AX7 tube. Each offers our unique 5-band active EQ for enhanced musical response. These channels can be individually selected or mixed together via a 5-button footswitch (included). This footswitch also accesses our Signal Shape circuit offering tonal enhancements for Low Frequency Extension, Mid Scoop or High Frequency Attack.

NEOX-212T Cabinet:

Price: $899.00

A compact, dual 12" design that drives with the heart of a 4 x 10" enclosure. The coupling of the 2 Neodymium loudspeakers along with the X porting of the cabinet combine to project round, solid, explosive performance on any stage.

The lightweight design, "Edge-Lift" handles and tilt-back casters make traveling with this NEO a breeze.